Swix T16M Roto Brush Horsehair 100mm

The first brush to be used for paraffin and Cera F.
Use a separate brush for Cera F

GENERAL – USE INSTRUCTIONS
– Always use safety goggles
– Do not press firmly, let the brush work
– Move from the tip of the ski towards the end of the ski, whereby the wax particles are thrown towards the end of the ski by the rotation
– Use a separate brush for brushing in / brushing out Cera-F, not the same as for the other paraffin waxes

BRUSH OUT WAX
1: Start with the T16M horsehair brush Max. 1000/2000 revolutions. Work without pressure.
2: Finish with the T17W nylon brush. Max. 1000/2000 revolutions.

CERA F PROCESSING WITH ROTOR
1: Use a hot wax iron at 160° or 165°C for 4-5 seconds per ski length.
2: Use the Rotor Fleece Brush (T18F or T18FC)
3: Continue with the Rotor Horsehair Brush (T16M) 4: Use the blue Nylon Finish Brush (T17W)